Recommended USB VAG KKL Cables

Pages: 1 ... 6 7 [8] 9 10 11

« previous next »

Author

Topic: Recommended USB VAG KKL Cables (Read 421735 times)

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: Recommended USB VAG KKL Cables « Reply #105 on: August 07, 2015, 03:08:50 AM »

Just received my new cable from eBay:
http://pages.ebay.com/motors/link/?nav=item.view&id=141651292396&alt=web
Works with nefmoto, me7l and older vag com.


	Logged

My project (all photos back online!)

marchewa

Full Member

Karma: +4/-0
Offline

Offline

Posts: 53

	Re: Recommended USB VAG KKL Cables « Reply #106 on: September 11, 2015, 03:10:53 AM »

Hello

Could someone upload vag-com eeprom dump for ftdi232r chip?

I've accidentaly flashed another file to my cable by MProg and just want to bring it back to life, but unfortunately i didn't save ori dump

Regards


	Logged

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: Recommended USB VAG KKL Cables « Reply #107 on: September 17, 2015, 12:45:23 AM »

I dont have a dump, but I did find this template on my pc. Maybe it works?


	Logged

My project (all photos back online!)

slappynuts

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 49

	Re: Recommended USB VAG KKL Cables « Reply #108 on: October 15, 2015, 06:00:57 AM »

Anyone using the arduino Ft232rl board? I am sick of buying cables and have them fail.


	Logged

slappynuts

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 49

	Re: Recommended USB VAG KKL Cables « Reply #109 on: October 15, 2015, 06:33:46 AM »

Quote from: TijnCU on August 07, 2015, 03:08:50 AM

Just received my new cable from eBay:
http://pages.ebay.com/motors/link/?nav=item.view&id=141651292396&alt=web
Works with nefmoto, me7l and older vag com.

I had tho one work a few times and then quit. Not sure what happened yet.


	Logged

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: Recommended USB VAG KKL Cables « Reply #110 on: October 16, 2015, 12:56:53 AM »

@slappynuts, I had the same, and after contacting the seller I tried to repair it with another usb cord. It did not work, but then the seller paid for return shipping and send me a new cable free of charge. He would then examine the cable himself too to find out the problem. My new cable works perfect again


	Logged

My project (all photos back online!)

slappynuts

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 49

	Re: Recommended USB VAG KKL Cables « Reply #111 on: October 16, 2015, 06:52:17 PM »

A quick look and a little solder action and this one is back in action. This FTDI chip does look like the real deal (laser etched).


	Logged

Larky

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: Recommended USB VAG KKL Cables « Reply #112 on: November 25, 2015, 12:10:40 PM »

From what i can tell its been more than a month since anyone has given notice as to which is a good cable to buy so i thought i would ask if anyone has bought a working cable that they would recommend/share a link or somethin. From reading the thread I hope all the bad cables are a thing of the past but i doubt it.
So far this is what i know from reading the entire thread and i hope this helps put it all together in a nutshell for others just starting out like me

looking for a
FTDI FT232R or FT232RL (L = Lead Free) chip KKL 409.1 OBD2 / ISO 9141 USB Cable

-What to Avoid

FT232B or FT232BL these dont have a reprogram-able chip that is needed by various software that identifies the cable and is also needed by Nefmoto for premium features to work
CH340 Chipset = bad, cant remember why just now but you dont want this

-What to look for
FT232R or FT232RL Must be a genuine FTDI chip or it will die with updated drivers also the R variant is reprogram-able which is needed for some software and Nefmoto for premium features
LM339 chip-set = good, this is the one to get

Well so far thats what i have i cut out alot of the why's and tried to keep it simple
would appreciate it if anyone has bought a working cable recently if they could post a link, I finally have some time and money to get working on this car of mine and want to get started right away


	Logged

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: Recommended USB VAG KKL Cables « Reply #113 on: November 25, 2015, 01:15:35 PM »

You could have better spent that time buying a cable that suits your needs and start tuning Grin

If you have doubts, look for sellers previously mentioned and write them your q's Roll Eyes


	Logged

My project (all photos back online!)

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Recommended USB VAG KKL Cables « Reply #114 on: November 25, 2015, 02:22:02 PM »

You could read the thread that isn't 5 years old, "CABLES THAT YOU, THE MEMBERS HAVE CONFIRMED WORKING".

or this

http://www.ebay.com/itm/USB-cable-for-Triumph-Motorcycles-TuneECU-FTDI-FT232RL-Chip-OBD-II-KTM-Tune-ECU-/301748110752?hash=item464196c5a0:g:B5oAAOSwFnFWAa8h&item=301748110752&vxp=mtr


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Instigater

Newbie

Karma: +0/-1
Offline

Offline

Posts: 18

	Re: Recommended USB VAG KKL Cables « Reply #115 on: April 15, 2016, 08:23:22 AM »

I got KKL cable off ebay and driver installed is CH340. Nefmoto doesn't show it under interfaces. Is it any good or I should consider it as a donation to Chinese economy?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Recommended USB VAG KKL Cables « Reply #116 on: April 15, 2016, 05:53:23 PM »

Quote from: Instigater on April 15, 2016, 08:23:22 AM

I got KKL cable off ebay and driver installed is CH340. Nefmoto doesn't show it under interfaces. Is it any good or I should consider it as a donation to Chinese economy?

Worthless.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

bobbyz0r

Jr. Member

Karma: +3/-0
Offline

Offline

Posts: 43

	Re: « Reply #117 on: April 15, 2016, 07:46:18 PM »

Someone correct me if I am wrong, but BMW K+DCAN cables usually have the FT232RL chip, as I don't think the CH340 works with the BMW INPA software. I've used one on a Subaru for SSM K line, and it worked fine for logging. They do tend to sell for a tad more than the knock off KKL cables though.

Sent from my Redmi Note 2 using Tapatalk


	Logged

Instigater

Newbie

Karma: +0/-1
Offline

Offline

Posts: 18

	Re: Recommended USB VAG KKL Cables « Reply #118 on: April 17, 2016, 09:38:51 AM »

I have BMW diagnostic cable and it works for reading and writing tunes. The sad part is that I cannot do any logging with this cable.


	Logged

217zenki

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: Recommended USB VAG KKL Cables « Reply #119 on: May 23, 2016, 07:59:16 PM »

I was instructed to buy the 409 cable by daz. I did so and now I'm trying use it for the first time after purchasing it 8months ago. I'm trying to get everything up todate before applying a tune. I jus bought a new laptop with windows 10 on it jus for this but I'm having issues. vcds only reads limited sections

Address 01: Engine
Protocol: KW1281
Controller:
Note: Excessive Comm Errors

Address 08: Auto HVAC
Protocol: KW1281
Controller: 8D0 820 043 P
Component: A4 KLIMAAUTOMAT D56
Coding: 00160
Shop #: WSC 06325

Address 15: Airbags
Protocol: KW1281
Controller:
Note: Excessive Comm Errors

Address 17: Instruments
Protocol: KW1281
Controller: 8D0 920 980 D
Component: B5-KOMBIINSTR. VDO D10
Coding: 02264
Shop #: WSC 00000

Address 33: OBD-II
Protocol: Huh

?
Controller: OBD-II/EOBD, Protocol Keyword: $0808

Address 35: Centr. Locks
Protocol: KW1281
Controller:
Note: Excessive Comm Errors

Address 45: Inter. Monitor
Protocol: KW1281
Controller:
Note: Excessive Comm Errors

Address 55: Xenon Range
Protocol: KW1281
Controller: 4B0 907 357
Component: LEUCHTWEITEREGLER D003
Coding: 00012
Shop #: WSC 06325

Why is this ? is there anything I can do to fix this issue?Im trying another laptop tomorrow to see if that's the culprit.


	Logged

Pages: 1 ... 6 7 [8] 9 10 11

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 12:20:08 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search