Pages: 1 ... 96 97 [98] 99 100 ... 170
Author Topic: The Volvo ME7 thread:  (Read 911635 times)
luki743
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 18


« Reply #1455 on: September 02, 2021, 02:31:02 PM »

Also I've checked CAN message for writing ECM memory. Message format is 7A BA XX YY ZZ DD
where XX is higher byte YY is medium and ZZ is lower. DD is a data.

Is it possible using 7A BA message to replace NMAX value? (rpm limit for LC, or something else)
Logged
prometey1982
Sr. Member
****

Karma: +48/-55
Offline Offline

Posts: 287



WWW
« Reply #1456 on: September 02, 2021, 07:27:41 PM »

Is it possible using 7A BA message to replace NMAX value? (rpm limit for LC, or something else)
NMAX is a constant inside flash. Only RAM can be changed. So you should change your program to work with RAM. On start just init RAM variable with NMAX from flash and later this value can be changed.
Logged

Россия - Великая страна!
prometey1982
Sr. Member
****

Karma: +48/-55
Offline Offline

Posts: 287



WWW
« Reply #1457 on: September 04, 2021, 12:40:46 AM »

I've checked speed limiter functionality. It was set to 40km/h. Works as expected.
https://youtu.be/GUOggmM9GsY
Logged

Россия - Великая страна!
vwdenisvw
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 26


« Reply #1458 on: September 06, 2021, 02:33:55 PM »

Implemented several functions.

LaunchControl+Antilag
NoLiftShift
Rolllaunch+Antilag


Early test versions
https://www.youtube.com/watch?v=eSHcehHqD_o
https://www.youtube.com/watch?v=GMgp0oILJC8
Logged

Volvo S60 2001 2.0T=>2.3T5
jahko
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 47


« Reply #1459 on: September 07, 2021, 01:15:02 AM »

kewl

Implemented several functions.

LaunchControl+Antilag
NoLiftShift
Rolllaunch+Antilag


Early test versions
https://www.youtube.com/watch?v=eSHcehHqD_o
https://www.youtube.com/watch?v=GMgp0oILJC8
Logged
vwdenisvw
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 26


« Reply #1460 on: September 12, 2021, 10:46:49 AM »

Here are over 20 fan control maps. You can at least lower the operating temperature from f*cking 105 deg С.
Logged

Volvo S60 2001 2.0T=>2.3T5
Tperf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1461 on: September 24, 2021, 08:09:30 AM »

Someone knows how remove orginal rpm limiter when car is standing? Now holds 4000rpm. Searched in file no found similar value.
looks like NMAX is 6200
Logged
daniel2345
Full Member
***

Karma: +11/-7
Offline Offline

Posts: 188


« Reply #1462 on: September 24, 2021, 10:24:32 AM »

Without looking at your file.

It is calibrated to use NMAXGA, a curve over gear points. First point is 4000 U/min, others have same value of 6200 or a little more. Your NMAX Value is ignored.

Good luck searching Smiley
« Last Edit: September 25, 2021, 06:28:31 AM by daniel2345 » Logged
Sashka_
Newbie
*

Karma: +4/-0
Offline Offline

Posts: 17


« Reply #1463 on: September 25, 2021, 01:38:58 AM »

Someone knows how remove orginal rpm limiter when car is standing? Now holds 4000rpm. Searched in file no found similar value.
looks like NMAX is 6200

Here is this map
Logged
Tperf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1464 on: September 26, 2021, 04:37:12 AM »

Here is this map
Big thanks, i thinked about this values. Tested and its working. Wink
Logged
prometey1982
Sr. Member
****

Karma: +48/-55
Offline Offline

Posts: 287



WWW
« Reply #1465 on: October 01, 2021, 01:30:31 AM »

Volvo s60r 2003 with aw55 and 76 mm downpipe. Boostup, disabled limiter on 1 and 2 gears and ignition angle increased on high load. Stock turbo k24.
Logged

Россия - Великая страна!
koponyanyimonyok
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #1466 on: October 21, 2021, 12:24:21 AM »

Hello!

I'm in search of a stock EU-spec 2001 XC70 2,4T AUTO file? Can somebody post one?

Thanks.
Logged
prometey1982
Sr. Member
****

Karma: +48/-55
Offline Offline

Posts: 287



WWW
« Reply #1467 on: October 22, 2021, 01:42:56 AM »

Hello!

I'm in search of a stock EU-spec 2001 XC70 2,4T AUTO file? Can somebody post one?

Thanks.
Hi, try this.
Logged

Россия - Великая страна!
koponyanyimonyok
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #1468 on: October 23, 2021, 03:27:30 AM »

Hi, try this.

Will try it, thank you.
Logged
Sashka_
Newbie
*

Karma: +4/-0
Offline Offline

Posts: 17


« Reply #1469 on: October 28, 2021, 03:28:48 AM »

Also I've checked CAN message for writing ECM memory. Message format is 7A BA XX YY ZZ DD
where XX is higher byte YY is medium and ZZ is lower. DD is a data.
Should I use Volvo DHA to send a message?
Logged
Pages: 1 ... 96 97 [98] 99 100 ... 170
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.073 seconds with 16 queries. (Pretty URLs adds 0s, 0q)