Pages: 1 [2] 3
Author Topic: Possible to disable LTFTs for long term fueling tuning?  (Read 30258 times)
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #15 on: April 24, 2012, 01:43:42 PM »

You need to disable rkaz too.

NOLRA can individually disable each range.
CDKVS == 0 no adaptive control is active (B_gaefra and B_gaeing are set to FALSE), cause RKAM (= RKAT resp. RKAZ) is never stabilized.
Correct or not?
« Last Edit: April 24, 2012, 01:55:06 PM by professor » Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #16 on: April 25, 2012, 12:09:34 PM »

My work so far:

tried N0 == 0 (rkat_w == 0), CDKVS == 0, NOLRA == 0 or 2 (rkaz reset) or 5

None of the above, even with some combinations ( NOLRA == 2 && N0 == 0 or CDKVS == 0 && NOLRA == 5), disable LTFT's.
I unplug evap solenoid and LTFT's are working.

I am open to any usefull advise or route to examine  Grin


Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #17 on: May 26, 2012, 04:22:30 PM »

So, anyone found working solution on how to disable LTFT? Grin
Logged

professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #18 on: May 27, 2012, 01:40:51 AM »

NOLRA == 5 to me without any other changes.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #19 on: May 27, 2012, 04:43:06 PM »

NOLRA == 5 to me without any other changes.

Nothing else and its good to go?  Great find man!  Can anyone verify this on their m-box setup?  I'll try if I get a moment this evening.
Logged
@lq!
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 62


« Reply #20 on: May 27, 2012, 11:03:11 PM »

Is there a way to turn off the m 3.8x or m 5.9.2 ?
Logged
@lq!
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 62


« Reply #21 on: May 30, 2012, 11:32:36 AM »

any think ?
Logged
sander82
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #22 on: September 23, 2013, 01:45:14 AM »

Hi,
I have a seat ibiza cupra 1,8 turbo 180hp and I need to disable LTFTs for long term fueling but I don't know the parameter "NOLRA".
I chipped this car with Alientech kit but I can't disable this...can you help me?? Thankssss!!!
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #23 on: September 23, 2013, 09:46:47 AM »

Pull your SAI relay out.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
sander82
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #24 on: September 23, 2013, 12:15:22 PM »

Pull your SAI relay out.
Thanks! Today I found the norla parameter. In origin is set to 4, I can set it to 5 and zero but after flash the ecu the O2reg in 099 group is On and the ltft, after many km is -7. When arrived -24 the mil is on with low boost pressure...can you help me?
Logged
technic
Full Member
***

Karma: +17/-5
Offline Offline

Posts: 227


« Reply #25 on: September 23, 2013, 12:27:17 PM »

I'd be careful disabling LTFT if I had -24 corr and limp...
Logged
sander82
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #26 on: September 23, 2013, 01:19:00 PM »

I'd be careful disabling LTFT if I had -24 corr and limp...
You sure!!! But..can I disable LTFT?? I  put NORLA=5 and zero but LTFT is on Sad
Logged
marian_gbg
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 17


« Reply #27 on: May 30, 2016, 02:26:53 PM »

Hi,
can someone tell me how I can enable LTFTs with VCDS if disablet ?
Logged
FlyboyS4
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 215


WWW
« Reply #28 on: September 27, 2017, 03:48:27 PM »

VCDS -> 099 -> switch basic settings ON -> LR off -> LTFT off

I take it there are a few other selections taking place between VCDS -> 099 to disable LTFT.

Could someone fill in the other steps.  Looking at VCDS I am not seeing how this is performed.
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #29 on: September 29, 2017, 02:36:23 AM »

Engine/basic settings - ch99
As soon you enter 99 Lambda regulation turns off.
This is simple way to check if injectors are setup properly at idle.
Needs wb02.
Cheers.
Logged
Pages: 1 [2] 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)