Pages: 1 ... 29 30 [31]
Author Topic: Overrun Flames, Gargle, Pop  (Read 101734 times)
pablofrtdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #450 on: February 06, 2019, 05:44:28 AM »

Hello guys, I have successfully implemented this on a 1.8T ME7, but now I have a MED9 on an audi TT 2.0 TFSI (car has turbo back exhaust system with 3inch downpipe amongst other mods...)

File is 8J0907115 (0261S02084) 386455

I have managed to find a few maps already.

I was wondering if someone could confirm what I found and help me find the rest ?

Here is what I found :

1CA0A9 : CWSAWE
1CD3B0 : KFZWOP
1D2340 : KFNWEGM_0_A
1D2368 : KFNWEGM_1_A
1D2390 : KFNWEGM_2_A
1D23B8 : KFTVSA
1D9D06 : KFZWMN

Thanks.

I have an Audi tt 2.0 TFSI.
I have changed:
CWSAWE
KFZWMN
KFTVSA
KFZW
KFZWOP

For me, the best is -17.5º on the two low loads columns from 4000rpm to 6000rpm and 0.8seg in KFTVSA.
I don't know why the ignition follows KFZWN from 4000rpm to 5000rpm but above 5000rpm, it follows other map (KFZW i think). This is the reason why i have modified kfzw too.
Logged
Dejw0089
Jr. Member
**

Karma: +1/-4
Offline Offline

Posts: 38


« Reply #451 on: February 06, 2019, 01:28:12 PM »

I have an Audi tt 2.0 TFSI.
I have changed:
CWSAWE
KFZWMN
KFTVSA
KFZW
KFZWOP

For me, the best is -17.5º on the two low loads columns from 4000rpm to 6000rpm and 0.8seg in KFTVSA.
I don't know why the ignition follows KFZWN from 4000rpm to 5000rpm but above 5000rpm, it follows other map (KFZW i think). This is the reason why i have modified kfzw too.
What about KFZWMS  KFZWMNHK KFZWMNST? I edited it too
Logged
pablofrtdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #452 on: February 06, 2019, 02:31:38 PM »

What about KFZWMS  KFZWMNHK KFZWMNST? I edited it too
Yes mee to. Kfzwmnhk no because is for catalyst heating. mnst, and ms yes.
I have changed too only the first column (10% load) un kfzw and kfzwop --> -18° ignition.
« Last Edit: February 06, 2019, 02:39:22 PM by pablofrtdi » Logged
andrax
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« Reply #453 on: February 09, 2019, 04:07:58 PM »

Hello all,

I've been able to implement this function with different settings.

I am now trying to activate this function with cruise control or A/C. I tried the combination with DNWEG (engine speed fuel on with AC) but without success. Does anyone have tried something similar?

How can I implement this function or change some relevant factor to activate fuel on through an extern button?

Logged
contrast
Full Member
***

Karma: +16/-1
Online Online

Posts: 204


« Reply #454 on: February 10, 2019, 03:25:57 AM »

Custom code.
Logged
slklite
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 73


« Reply #455 on: February 11, 2019, 03:39:24 AM »

I have an Audi tt 2.0 TFSI.
I have changed:
CWSAWE
KFZWMN
KFTVSA
KFZW
KFZWOP

For me, the best is -17.5º on the two low loads columns from 4000rpm to 6000rpm and 0.8seg in KFTVSA.
I don't know why the ignition follows KFZWN from 4000rpm to 5000rpm but above 5000rpm, it follows other map (KFZW i think). This is the reason why i have modified kfzw too.

Hello, thank you for your reply ?

Could you post some screens of what you did ?

Thanks.
Logged
andrax
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« Reply #456 on: February 12, 2019, 02:40:01 PM »

Custom code.

Thanks for the Input. I believe that´s something that I can´t do just following the Funktionsrahmen...

However this funktion is also connected with AC control. Is a solution changing the standard code anyhow possible?
Logged
Pages: 1 ... 29 30 [31]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)