Pages: 1 ... 29 30 [31] 32 33 ... 43
Author Topic: Overrun Flames, Gargle, Pop  (Read 354538 times)
pablofrtdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #450 on: February 06, 2019, 02:31:38 PM »

What about KFZWMS  KFZWMNHK KFZWMNST? I edited it too
Yes mee to. Kfzwmnhk no because is for catalyst heating. mnst, and ms yes.
I have changed too only the first column (10% load) un kfzw and kfzwop --> -18° ignition.
« Last Edit: February 06, 2019, 02:39:22 PM by pablofrtdi » Logged
andrax
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 21


« Reply #451 on: February 09, 2019, 04:07:58 PM »

Hello all,

I've been able to implement this function with different settings.

I am now trying to activate this function with cruise control or A/C. I tried the combination with DNWEG (engine speed fuel on with AC) but without success. Does anyone have tried something similar?

How can I implement this function or change some relevant factor to activate fuel on through an extern button?

Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #452 on: February 10, 2019, 03:25:57 AM »

Custom code.
Logged
slklite
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 75


« Reply #453 on: February 11, 2019, 03:39:24 AM »

I have an Audi tt 2.0 TFSI.
I have changed:
CWSAWE
KFZWMN
KFTVSA
KFZW
KFZWOP

For me, the best is -17.5º on the two low loads columns from 4000rpm to 6000rpm and 0.8seg in KFTVSA.
I don't know why the ignition follows KFZWN from 4000rpm to 5000rpm but above 5000rpm, it follows other map (KFZW i think). This is the reason why i have modified kfzw too.

Hello, thank you for your reply ?

Could you post some screens of what you did ?

Thanks.
Logged
andrax
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 21


« Reply #454 on: February 12, 2019, 02:40:01 PM »

Custom code.

Thanks for the Input. I believe that´s something that I can´t do just following the Funktionsrahmen...

However this funktion is also connected with AC control. Is a solution changing the standard code anyhow possible?
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #455 on: February 28, 2019, 11:41:04 AM »

Has anyone done this in ME7.1.1 3.2VR6?

Yep, I
Logged
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« Reply #456 on: April 24, 2019, 04:14:43 PM »

anybody using KFLAMKRL for flames???
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #457 on: April 25, 2019, 12:43:35 AM »

Fueling based on knock?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #458 on: April 25, 2019, 02:43:03 AM »

Fueling based on knock?

lol
Logged
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« Reply #459 on: April 25, 2019, 04:24:15 PM »

Fueling based on knock?

Well when I accidentally found it in my file while I was extending my definitions I only seen “enrichment on ignition retard” in the description and the axis seemed like they’re in load to rpm. So I was thinking maybe that’s a place I could add or take fuel in that area.. otherwise I have no idea what it’s for..
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #460 on: April 25, 2019, 05:06:26 PM »

Well when I accidentally found it in my file while I was extending my definitions I only seen “enrichment on ignition retard” in the description and the axis seemed like they’re in load to rpm. So I was thinking maybe that’s a place I could add or take fuel in that area.. otherwise I have no idea what it’s for..

And reading the S4 tuning wiki is out of the question?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #461 on: April 30, 2019, 10:11:10 AM »

Can anyone help me find CWSAWE and KFTVSA in this file?
Logged
multitek
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 11


« Reply #462 on: May 02, 2019, 03:25:17 AM »

Can anyone help me find CWSAWE and KFTVSA in this file?

look at:
CWSAWE 1C5A54 1x1
KFTVSA 1C5A69 5x8
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #463 on: May 02, 2019, 04:54:02 AM »

look at:
CWSAWE 1C5A54 1x1
KFTVSA 1C5A69 5x8


Thank you, already added in my definition.
Can you help me with this topic?

http://nefariousmotorsports.com/forum/index.php?topic=16076.0title=
Logged
andrax
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 21


« Reply #464 on: May 02, 2019, 02:12:39 PM »

Hello all,

I have successfully implemented this function on lift off condition.

Now I am looking to achieve some bangs during gear change with dsg gearbox. I keep hearing some cars with a loud bang on chear change. Does someone already done it?
The idea to do it should be similar, retarding the ignition and letting fueling as it does standard during chear change event.
There are a few ignition maps only for gear change but I couldn't achieve this effect yet. Maybe a different ignition angle is needed for this.

I appreciate any input!

Thanks
« Last Edit: May 12, 2019, 12:08:49 PM by andrax » Logged
Pages: 1 ... 29 30 [31] 32 33 ... 43
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)