Pages: 1 ... 83 84 [85]
Author Topic: The Volvo ME7 thread:  (Read 363320 times)
prometey1982
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #1260 on: June 21, 2020, 12:34:00 PM »

Yes and tvub too, I forgot to mention it. I want to use electronic boost controller, will this be a problem? The maf housing is 3.5", 60% bigger area than stock. Should I change the map with 60% for the beggining? Or should I use stock maf housing and scale new injectors, and only then rescale maf. I found krkte from s60r, what about tvub, should I change it using percent?
You should set TVUB for your injectors. My OLS file contains TVUB and KRKTE for s60r. Read WIKI more you must know what you do. And you need change one part by the time. If you change injectors then you need change KRKTE and TVUB and logs must contains around zero corrections. When you will finish with injectors you can start with MAF.
Logged
yo87_racing
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 7


« Reply #1261 on: June 21, 2020, 02:42:01 PM »

Well my s60r ols file have krkte and tvub too. krkte is the same in both files. Should I take that as good? and copy krkte from that? I think should be fine. Well I read wiki and else, but still have few doubts.
Logged
prometey1982
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #1262 on: June 22, 2020, 09:37:30 AM »

Well my s60r ols file have krkte and tvub too. krkte is the same in both files. Should I take that as good? and copy krkte from that? I think should be fine. Well I read wiki and else, but still have few doubts.
Post your ols file. Volvo s60r has 440cc injectors. If you will install R injectors then you should set KRKTE and TVUB from R ols. Otherwise you need to calculate KRKTE http://nefariousmotorsports.com/forum/index.php/topic,320.msg6774.html#msg6774 and TVUB for your new injectors.
Logged
prometey1982
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #1263 on: July 01, 2020, 12:55:39 AM »

Continue John's way. I was able to understand how motronic gets data from the maps. And by this approach was able to found more maps inside BIN. But I still didn't understand internal fuel calculations (and how it works at all on low level). Need more time.
Logged
Pages: 1 ... 83 84 [85]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)